How to Deep Clean Earbuds

If you’re having trouble keeping your earbuds looking fresh, it’s time to learn how to deep clean earbuds. Here are some tips. Use a cloth that’s soft and non-abrasive, and wash the earbuds with warm water and antibacterial soap.

If you’re having trouble cleaning the wires, you can mix hand soap or liquid detergent with water and use that solution to scrub them.

To deep clean your earbuds, simply dip a soft microfiber cloth in the solution and wring it until it’s not dripping.

Close up of wired earbuds that are super clean and no visible defects

Cleaning earbuds

Before cleaning your earbuds, unplug your headphones from your audio device. Since earbuds draw power from the connected device, cleaning them can short out the device.

You should clean them before and after using them to prevent the spread of bacteria. Depending on their dirtiness level, you can perform the following cleaning steps in two to three minutes:

First, clean the grilles on your earbuds by using a toothbrush. The cleaning process should be done gently, but not in a harsh manner. Avoid using downward pressure as this may damage the grille. Using a toothpick or other cleaning tool can be beneficial.

Just make sure not to jam the swab into the driver or filter compartment. Then, repeat the procedure using a clean earbud.

For deeper tips, you can use putty or cleaning gel. The cleaning gel will remove most of the gunk, but if you have to clean the entire earbud, you may need to repeat the process with the scraper or putty.

Keep working at it bit by bit until the earbuds are clean and shiny. This way, you won’t get a messy earbud. If the cleaning method doesn’t work, you may want to take them to a hearing aid store for deep cleaning.

Another method involves moldable putty. Just press the putty against the dirty area with a soft squeegee, or you can also try a small brush to remove the dirt. When cleaning your earbuds, don’t use too much water because this can cause a lot of debris.

However, if you want to minimize the mess, you can use a sponge. If you’re not comfortable using a toothbrush, you can use a water-dampened paper towel.

Depending on the type of earbud you have, you may need to take them out of your ears and wash them with alcohol or water. In addition to alcohol, regular soap and warm water can also be used to clean them.

When cleaning the earbuds, keep in mind that you should also clean the ear tips, which are the covers on the underlying earbud. These can be made of different materials or shapes.

In addition to using antibacterial soap to clean your earbuds, you can also use a solution of warm water and rubbing alcohol. It will disinfect and remove any dirt and grime while removing odors and other debris from them.

You can also use liquid detergent to disinfect the wires of your earbuds. Remember to allow the earbuds to dry before putting them away to prevent bacteria from growing.

If you regularly use your earbuds, you can try cleaning them once a week. Wiping them with a microfiber cloth and alcohol wipes can help remove the dirt and grime that accumulates.

After cleaning, you can expect your earbuds to stay free of ear wax for at least two months. However, earbuds eventually get dirty from sweat, dirt, and earwax.

As mentioned above, the earbuds are small and can fit in your pocket. If you are not careful, you may end up with an ear infection.

In addition to bacteria, earbud gunk can cause blockage in sound and prevent the vibrations from reverberating in the ears. So, it is always wise to clean them regularly. It is simple and easy to do. Then, you can enjoy your music.

The importance of cleaning your earbuds can’t be stressed enough. Studies have shown that bacteria can be transferred through headphones and lead to an ear infection. It is not uncommon for your earbuds to get dirty and shared by people.

If you don’t clean them regularly, you’re at risk of getting a bacterial infection. If you’re using headphones with a lot of people, you should consider washing them frequently and thoroughly.

Alcohol is a good choice for cleaning earbuds. Avoid rubbing alcohol directly on the grills. Alcohol also causes the earbuds to become more fragile. You can also use a cotton swab as a cleaning solution.

However, you should avoid using disinfecting wipes or Clorox because these products have too much liquid and could damage the mesh speakers and the interior of the case. After cleaning, set your earbuds down to dry.

Besides cleaning your earbuds, you should also check them for earwax buildup. If they are plugged in, the earbuds won’t work properly, and you may have to purchase new ones.

This may be a waste of money, so you might as well invest some time in cleaning them regularly. After all, this will prevent the earbuds from becoming completely unusable.

Clean your earbuds on a weekly basis. Deep cleaning them once a month will remove accumulated dirt, dust, and wax. Alcohol wipes are a great choice for weekly cleaning, but alcohol wipes are bad for leather.

If you don’t have alcohol wipes available, you can simply use warm soapy water to clean them. And remember to clean any electronic item with warm water – your headphones will look better if you clean them on a regular basis.

Photo of author

Josh Koop

I love listening to everything I can, from podcasts to music and movies. I have always loved to live in my head, and headphones were a portal to help quiet the noise in my head. Now I write and hope to bring to your attention all the best information to learn how to enjoy your experience just as much as I do!

Leave a Comment